Features:
Solar Panel:
Feature:
Used to charge mobile phone, MP3, pad, or other USB-charged device.
Double USB female port, easily charge device via USB charging cable.
You can place the panel in the sun and use it to directly charge your device.
Great for outdoor cycling, climbing, hiking, camping, traveling, etc.
Controller:
1.Build-in industrial micro controller.
2.Fully 4- PWM charge management.
3.One-key setting,digital display, auto memory function.
4.Dual mosfet Reverse current protections, low heat productions.
5.Build-in short-circuit protections, open-circuit protections, reverse protections, over-load protections.
Specifications:
Solar Panel:
USB output: 5V
USB port quantity: Double
Solar panel voltage: DC12-18V
Material: Polysilicon silicon cell
Solar panel power: 25W
Suitable for: Cycling, Climbing, Hiking, Camping, Traveling, etc.
Controller:
Model: PWM
Buck charge: 28.8V
Float charge: 27.4V
USB output: 5V/3A
Self-consume: <10mA
Discharge stop: 21.4V
Voltage: DC 12V/24V
Max solar input: <50V
Current: 10A/20A/30A/40A
Rated working current: ≤20A
Discharge reconnect: 25.2V
Working temperature: -35℃~60℃
Output voltage: 12V/24V Automatically distinguish voltage
With Timer and light sensor, it could work for solar light system(Only For off-Grid PV Solar System):
-For 10A 12V Pv System: 120W Solar Panel, 12V Lead-acid Battery, 21V for Max input Voltage.
-For 10A 24V Pv System: 240W Solar Panel, 24V Lead-acid Battery, 42V for Max input Voltage.
Safety Instructions:
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL(It is not suited for nickel metal hydride, lithium ions or other batteries).
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
System Connection:
1.Connect the battery to the charge regulator – plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
2.Connect the photovoltaic module to the regulator – plus and minus.
3. Connect the consumer to the charge regulator – plus and minus.
Note:
Please allow 0-2mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1X 25W Solar Panel
1X Solar Controller(10/20/30/40A)
4X suction cup
1x Crocodile clip
1X Car Charger
1X User Manual

Super
Good product
Thank you, good
Consistent with the description, I just plugged it into a car battery, for now everything works
OK, will learn to use.
excellent
Great store! The controller was missing from the original shipment. But after a few emails they sent me a replacement unit. Great service from a 5-star seller. Recommended!
On september 17, the order was paid, on october 14 was handed over by courier in rostov-on-don. Packing cardboard box, outwardly completely without dents or deformation. Inside the package still hung a box with a charge controller, also without external damage. When removing the solar panel without visible defects, the protective film is glued casually, it's in the photo, i did not touch it at all. When carefully considered on the back of the panel, 2 dents are noticeable (see. Photo), which is not at all on a cardboard box. Most likely, these dents are received before sending the order to me. On the back of the panel there is an unsealed and slightly dangling box with 2 usb outputs and a short cord with a connector for 12 volts. I wanted to use the panel on the street, to recharge the autonomous lighting in the garage from the battery 12-7va (such are usually in trouble-free), but for this you will have to shoot a box unequivocally. In a week i will install everything and add feedback.
NOTA 10...
Dear XIBERIA Global Flagship Store Thanks for supply components Greeting from Curico Chile