GT06 is a Mini intelligent GPS Vehicle positioning terminal. It combines the GSM wireless communication technology and GPS system technology, industrial-quality terminals with highly integrated design, intelligent energy-saving and passive drift suppression, installation is simple, connect the power supply to start immediately, wide input voltage range, wide application to all types of cars, motorcycles, electric cars, ships, etc., can offer all-weather, real-time vehicle positioning function, with global positioning service platform, you can achieve remote vehicle management.
Device feature
Working on the basis of existing GSM / GPRS and GPS satellites, this product can find and monitor remote targets via SMS or internet.
Features overview:
1. GPS position.
2. GSM 850/900/1800/1900 MHZ.
3. with Shock sensor.
4,300 Mah Battery in, Power-Cut alarm.
5. Auto set APN.
6. Voltage 9-50 V.
7. SOS alarm.
8. Voice Surveillance.
9. Detect ACC.
1. specification
1). GSM: 850/900/1800/1900 MHZ
2) .GPRS: Class12, TCP / IP
3). Working voltage: 9-50 V DC
4). Working current: 22mA (12VDC)
5). Working current: 12mA (24VDC)
6). GPS locating time:
Cold start: 38 s (Open sky)
Warm start: 32 s
Hot start: 2 s (Open sky)
7). GPS Precision: 10 m (2D RM)
8). Working temperature: -20 centigrade ~ + 70 centigrade
9). Working humidity: 20% ~ 80% RH
10). Measurement: 98 (L) × 52 (W) × 16. 5 (H) mm
2. Accessories
Power wire
SOS thread
Microphone
Relay
3. Platform:
The platform free use for 1 year.
Real time tracking platform: www.dyegoo.net
APP: Www.dyegoo.net/app
Demo account: demo2018
Password: 123456
4. Wire defined
5.Wiring device
6. SMS Commands instruction
1) Administrator Number | ||
Text command | Parameter | Sample |
CENTER Add | 710 # number #
711 # number # |
710 # 13500135000 #
711 # 13800138000 # |
CENTER Del | D01 #
D02 # |
D01 #
D02 # |
Command Description | 1) Number can change the oil and power and resume factory settings
2) Number can receive the call and text of vibration alarm and speeding alarm. 3) SIM must display the income number to control oil and power. 4) Only a number can be number. 5) change center number must resend the command. 6) Add new center number by CETNER, ONE, and delete it by CENTER, D |
|
Feedback command | Successful Institution: Add admin account 1 OK! |
2) View Administrator Number |
|||
Text command | Parameter | Sample | |
View | 901 # | 901 # | |
Command Description |
This guideline has been used to identify Device Manager. |
||
Feedback command | Successful Institution: Admin1:
Admin2: |
||
3) Authorized Number Set |
||
Text command | Parameter |
Sample |
Authorized Joints | 101 # number #
102 # number # 103 # number # |
1: 101 # 13800138000 #
2: 102 # 12345678912 # 3: 103 # 12345678912 # |
Authorized Del | D11 #
D12 # D13 # |
D11 #
D12 # D13 # |
Command Description |
1) authorization for SMS checking oil. 2) only three numbers to the permit number 3) Change the permit number must delete the previous number |
|
Feedback command | Successful Institution: Add Permission account 1 OK! |
4) View Authorized Number | ||
Text command | Parameter |
Sample |
View authorized |
C10 # |
C10 # |
Command Description |
This directive is used to number the equipment license |
|
Feedback command | Successful Institution:
License 1: License 2: License 3: |
5) APN Setting | ||
Text command | Parameter | Sample |
APN Setting | APN # username # password] | 1: APN # intenet # 123 # 123 #
2: APN # internet # |
Command Description | APN differs according to the local telecom operators.
For example: APN request password, refer to Sample 1, and Sample 2 for no password. |
|
Feedback command | Successful Setting: SET APN OK! |
6) Set / View Server | ||
Text command | Parameter | Sample |
SERVER Parameter | 803 # SERVER # port # | 803 # 222.217.240.243 # 8011 # 8011 |
View SERVER | CIP # | 1) CIP # |
Command Description | Change the IP and port when moving to a new server
Port: 10 ~ 65535 1 is domain and 0 is IP; |
|
Feedback command | Successful Institution: set IP OK! |
7) Moving Time Interval | ||
Text command | Parameter | Sample |
TIMEER Parameter setting | 730 # upload interval # | 730 # 20 # |
Command Description | Time scope: 0.10 ~ 60 seconds; 0, no data upload;
10 ~ 60, means time interval; the default value is 15 seconds! |
|
Feedback command | Successful Setting: SET TIMER OK! |
8) Static Time Interval | ||
Text command | Parameter | Sample |
STATIC | SUP # time interval # | SUP # 5 # |
Command Description | Timescope: 1 ~ 60 seconds; The device has
3D transmission and the standard time interval are 5 minutes. |
|
Feedback command | Successful Setting: SET STATIC TIME OK! |
9) Cancel the continuous upload | ||
Text command | Parameter | Sample |
NUP | NUP # | NUP # |
Command
Description |
This command is used to cancel sending data to the platform
If necessary to restore the upload again, you must TIMEER Parameter setting. |
|
Feedback command | SET OK! |
10) Power-Cut | ||
Text command | Parameter | Sample |
RELAYParameter1 | 222 # | 222 # oil and power cut off |
RELAYParameter2 | 333 # | 333 # restore oil and power |
Command Description | 1) RELAY control the start and proximity of the relays
2) Only the number can operate. 3) The device only cut off the oil circuit at the state of the driving speed below 20KM / H or in static condition. 4) when send the command, the device will reply “wait” When the vehicle speed is over 20 KM / H, the device will cut off the oil or the power when the speed below is 20 KM / H. |
|
Feedback command | Successful Setting: Fuel cut is already completed OK! |
11) GMT | ||
Text command | Parameter | Sample |
GMT | 801 # location, time # | 801 # E8 # |
Command Description | The default time zone is Beijing time. If time zone needs review, then work according to the above command. | |
Feedback command | Successful Setting: Set time zone ok! |
12) Vibration Sensitivity | ||
Text command | Parameter | Sample |
VIBRATIONS Parameter | 123 # 2 #, alarming way # | 1) 123 # 2 # 3 # |
Set in vibration alarm time | V123 # 2 # | 1) V123 # 2 #
2) V123 # 1 # |
Cancel vibration alarm | 456 # | 456 # |
Command Description | The sensitivity value of the vibrations is from 1 to 5, 1 is the most sensitive and o is close. Alarming ways: 1, calling 2, texting, 3 calling and texting.
Must have the number and received number. |
|
Feedback command | Set vibration alarm level, OK! |
13) Speeding | ||
Text command | Parameter | Sample |
SPEEDING Parameter | SSA # 120 # alarming way # | 1) SPEEDING, 120.3 #
2) SPEEDING, 120 # |
Command Description | The speed scope is form 60-220, if the speed is not this handle, the alarm is off.
Alarming: 1, calling 2, texting, 3 calling and texting. Must have the number and received number. |
|
Feedback command | Successful Institution: set speeding alarm, OK! |
14) Reset | ||
Text command | Parameter | Sample |
RESET | 930 # | 930 # |
Command Description | Reset the device | |
Feedback command | Successful Institution: Reset system, ok! |
15) Factory | ||
Text command | Parameter | Sample |
Parameter | 940 # | 940 # |
Command Description | Restore the factory setting
Only number can initial this function Factory setting will restore to the original setting |
|
Feedback command | Successful Institution: FACTORY OK! |
16) Language Setting | ||
Text command | Parameter | Sample |
LANG Parameter | LANG1 #
LANG0 # |
LANG1 # 1: CHINESE,
LANG0 #: ENGLISH |
Command Description | ; When check the location, the answer will be from the Chinese location in Chinese language setting; while replying the URL link when in English language setting. | |
Feedback command | Successful Setting: SET LONG OK! |
17) Position | ||
Text command | Parameter | Sample |
TRUE | 988 # | 988 # |
Command Description | Check the length and height and other information of the device | |
Feedback command | Answers with length and height, speed and IMEL. |
18) Google Link | ||
Text command | Parameter | Sample |
TRUE | 666 # | 666 # |
Command Description | Check the location link of Google map | |
Feedback command | <Datetime: 12-07-05 13:21:30>
Maps.google.com/maps?q=N22.540885,E113.95265 |
19) Version | ||
Text command | Parameter | Sample |
VERSION | V00 # | V00 # |
Command Description | The assignment is to get the software version | |
Feedback command | VERSION: Xxxx
BUILD: 2012-07-05 10:12 |
20) Param Check | ||
Text command | Parameter | Sample |
PARAM | 886 # | 886 # |
Command Description | The command is to change the settings and the default parameter. | |
Feedback command | IMEI: 351190012535936
APN: cmnet IP: IP and port TIMER: moving upload interval STATIC: static upload interval CENTER: center number LANG: language (CN / NL) GMT: time zone (E / W8) |
21) Check status | ||
Text command | Parameter | Sample |
STATUS | 902 # | 902 # |
Command Description | The command is designed to check the device working status. | |
Feedback command | External power supply: ON / OFF
GSM Signal: HIGH / MIDDLE / LOW GPS: FIXED / UNLOADED RELAYER: SWITCH OFF / SWITCH ON Vibration Warning: ON / OFF Pause: ON / OFF |
22) Monitor (Voice Surveillance) | ||
Text command | Parameter | Sample |
SSS # | SSS # | SSS # |
Command Description | Use Command Send this command to the tracker number, the tracker will call admin number. | |
Feedback command |
FOR ONLINE TRACKING AND SUBSCRIPTION